Resource Library

Pranav Vikas Achieves 17% Material Savings with Light Weight and Optimised Product Designs using Altair HyperWorks™ Solutions

With over 2 decades of experience in manufacturing Aluminum Heat-exchangers such as Condensers, Evaporators, Heaters, Radiators, Oil Coolers, IHX and Roof AC units, Pranav Vikas (India) Private Limited (PVL) today is one of the largest and most di...

Customer Story

Composites Driving Innovation: Development of a Sit-Ski as an Advanced Technology Demonstrator

The National Composites Centre (NCC), in collaboration with the Manufacturing Technology Centre (MTC), Advanced Manufacturing Research Centre (AMRC) and University of Warwick (WMG) worked on a collaborative project to develop a Cross-Catapult tech...

Customer Story

No more Gone with the Wind – Pedestrian Comfort Improvements on Quinta Torre with AcuSolve Computational Fluid Dynamics

Officially known as the Caleido project, the Fifth Tower in Madrid is owned by Inmobiliaria Espacio, a company that, among other services, deals with infrastructure and construction for all types of buildings.

Customer Story

More Efficient and Economic Injection Mold Tools thanks to Topology Optimization, CFD Simulation and 3D Printing

Toolmaking is usually characterized by cost-intensive, custom made, single-unit production. To create innovative tools, the industry increasingly relies on new manufacturing methods such as 3D printing. To meet market demand, PROTIQ GmbH, a spinof...

Customer Story

Characterizing the Murchison Widefield Array Beam Pattern

A precursor to the SKA, the Murchison Widefield Array (MWA) radio telescope was constructed in the Murchison Radio-astronomy Observatory in Western Australia. In order to correctly calibrate and image the data collected by the radio telescope, it ...

Customer Story

Woodland/Alloy Casting, Inc.

Woodland/Alloy Casting is simulating and testing aluminum casting projects in Altair Click2Cast. By running simulations in Altair Click2Cast, Woodland/Alloy Casting can more accurately predict defect-free castings, while reducing time and cost in ...

Customer Story

LEIBER Group

LEIBER Group, which specializes in developing lightweight metal components, applied topology optimization to determine the ideal shape for a vehicle suspension beam, resulting in mass savings of over 50%

Customer Story

Case Study: Ensuring Success of Marine Operations in Tidal Energy

Installation analysis of OpenHydro turbine using ProteusDS.

Customer Story

Top Use Cases: Coustyx

Presentation introducing a few of the top use cases for the acoustic analysis software, Coustyx.

Customer Story

High Performance Computing Speeds-up Optimization Processes for Tailor Rolled Blanks at Mubea

OEMs and suppliers include every possible technique to support lightweighting in the automotive industry. It is common to use optimization techniques in order to identify and tab existing lightweight potentials as well as design tailor rolled comp...

Customer Story

Using Topology Optimization with solidThinking Inspire for Improved Casted Rail Compoments

A simulation driven approach was taken using solidThinking Inspire for topology optimization, Evolve for shape refinements and HyperWorks for FE analysis for the optimization of an existing component design to be manufactured with casting/AM techn...

Customer Story

Wayne State University

Wayne State University discusses their use of PBS Professional.

Video Testimonials

Korea Meteorological Administration Implements Cost-saving Innovations for Electricity Usage with PBS Professional and AcuSolve

“PBS Professional has been a very reliable workload manager for our large, complex supercomputing systems… Cray and Altair are supercomputing leaders in the weather and climate modeling industry, and we are more than happy to have collaborated for...

Customer Story

Characterization of Sensorless Motor Control Technology Using VisSim

“A key benefit to using VisSim for this project is its code generation capability and how quickly and fast it works. The speed of how its drivers work and being able to interface directly with our ROM code was really the key enabler for me, and th...

Customer Story

Optimized Design for 3D Printed Valve Block Sheds Weight, Size and Gains Improved Performance

Not every component or product is suitable
for 3D printing, depending on its size, form
and design as well as the quantity needed.
A valve block is very suitable for 3D printing
and has a high potential for improvement in
weight, performance, and design freedom
when additively manufactured.

Customer Story

Steve McGugan Industrial Design

Award winning industrial designer Steve McGugan uses Altair Evolve to design and model a range of unique products.

Customer Story

EDAG: Developing Commercial Vehicles Inspired by Nature

As Germany's largest independent engineering
partner to the worldwide automotive industry,
EDAG is continuously seeking for new technology and for innovative processes to streamline vehicle development.

Customer Story

Fully automated in a single process: Optimization and manufacturing of CFRP components

Use of HyperWorks and adapted threestep optimization process for Composite materials integrated in the production process

Benefits:process suitable for large volume seriesflexibility in productionshort learning curve for userslight and yet stiff components
/li

Customer Story

Optimal Design Exploration Using Global Response Surface Method: Rail Crush

As design exploration and optimization methods have become commonly accepted across a range of industries, such as aerospace,
automotive or oil and gas, they are frequently utilized as standard practice to efficiently produce designs and aid critical engineering decisions. The widespread acceptance

Customer Story

Tesla Optimizes CAE - Desktop Engineering Reprint

Automating CAE connectors creation in HyperMesh and utilizing HyperStudy for pedestrian impact simulation helped optimize Tesla’s design cycle and get better crash and safety performance.

Customer Story

Arup Uses the Latest Simulation Technologies for Architectural Design

Arup has determined the anticipated conditions throughout the interior of a complex architectural space through computational fluid dynamics (CFD) modeling. In this video Caroline Lama, Façade Engineer at Arup NY, explains how HyperMesh has been u...

Customer Story

HardMarque

HardMarque coupled topology optimization with additive manufacturing to conceptualize and refine the design of a piston. The final piston design is 23.5% lighter than the original design. 

Customer Story

SEGULA Technologies optimizes its enterprise IT investment using Altair’s software asset optimization solution

Industry
Engineering Service Provider

Challenge
Need to handle and monitor a very large variety of commercial software licenses and to optimize the software usage.

Altair Solution
License monitoring delivering information about the actual scope of software usage with Altair’s SAO solution,

Customer Story

Peter Macapia, LabDORA

Architect Peter Macapia aims to change perceptions of how buildings can look; generative design software aids in imaginative engineering and architecture projects, integrating design and testing in the same space.

Customer Story

Reducing Weight and Maximising Fuel Efficiency of a Formula Student Car with OptiStruct

Durham University Electric Motorsport (DUEM), are a UK-based team of students who design, build and race electric vehicles. In this project, DUEM wanted to demonstrate how they have applied the latest weight saving technology to achieve a faster, ...

Customer Story

Streamlining Aerodynamic CFD Analyses

External aerodynamic simulations using computational fluid dynamics (CFD) are well established tools in the product development process for
the automotive and aerospace industries. CFD simulation technology helps engineers to understand the physical phenomena taking place in
their design and pro

Customer Story

The Successful Application of HyperWorks at Lenovo

To increase efficiency, improve the quality of meshing and shorten CAE simulation time, Lenovo engineers needed to own a powerful pre-processing tool, one that would really meet the demands of scientific research and engineering innovation. For th...

Customer Story

XOX Audio Tools

XOX Audio Tools utilizes high design and advanced technologies to create cutting-edge musical instruments.

Customer Story

Body-In-White Design for a Six-Passenger Sports Car Architecture: Maximizing Body Stiffness and Meeting Strength Requirements Using HyperWorks

The Deep Orange Program has partnered with Altair to apply advanced computational simulation methods to their vehicle designs. Altair-sponsored internships and fellowships have enhanced student learning through
providing webinar-based and on-sight instruction of Altair HyperWorks simulation technol

Customer Story

Nippon Sharyo Uses AcuSolve Simulation to Make Japan’s Bullet Trains Safer, More Comfortable

Customer Story

Biogemma Uses Improved Memory Sharing to Minimize Research Time

Written by SGI, this case study discusses how Biogemma, a plant biotechnology research firm, used PBS Professional to optimize the analysis pipeline, reducing runtimes by over 60%.

Customer Story

AcuSolve Validation - NACA0012 Airfoil

This benchmark validates AcuSolve for external aerodynamic applications. NACA0012 has been studied in depth both numerically and experimentally. AcuSolve results are compared with other CFD software results and with available test data

Customer Story

Unilever

Optimizing Packaging Designs & Reducing Prototype Costs

To remain at the forefront of innovation within the male grooming market, Unilever, constantly looks for ways to differentiate their products from competitor offerings. For the Lynx (Axe) brand, Unilever needed to adopt a simu

Customer Story

OPEL

Improving Design Productivity through Automation

OPEL identified the design process of engine mount systems as a candidate for a process automation solution. As an objective, NVH engineers had to be able to generate input decks even without detailed load case information. Knowledge

Customer Story

Structural Optimization Helps Launch Space Payloads

Aerospace company employs simulation software to reduce weight in the Launch Abort Manifold for the Orion Multi-Purpose Crew Vehicle.

By Blaine E. Phipps, Michael H. Young and Nathan G. Christensen
Concept To Reality Summer/Fall 2011

Customer Story

MIMOS Berhad Delivers HPC Across Malaysia with Cloud

In partnering with PBS Works, MIMOS Berhad
brought onboard a strategic collaborator
committed to help its clients overcome
these limitations by deploying Altair's
PBS Professional®, the industry leading
commercial workload management and job
scheduling solution.

Customer Story

Managing 30 Teraflops of Compute Power: PBS Professional at Italy’s CILEA Consortium

With 30 teraflops of peak computing power, it has ranked as high as 135th among the Top 500 high performance computing centers. PBS Professional keeps CILEA’s processors humming.

Customer Story

PBS Professional at National Institute of Health

Twenty-seven institutes and centers make up the National Institutes of Health. Many of their acronyms, listed on the NIH website (nih.gov), can be as mysterious as hieroglyphics: NHGRI, NIGMS, NIAMS. Others, such as NCI (National Cancer Institute)...

Customer Story

Optimization Methods Land Results in ExoMars Project

Sophisticated simulation tools enable aerospace engineers to study the feasibility of airbag landing systems.

Customer Story

Optimizing Aircraft Structures

Optimization technology and methods for the innovative design of efficient civilian and military aircraft.

Customer Story
356 Results

한국알테어 뉴스레터 구독하기

월간알테어 구독 신청하시고 더 많은 이벤트와 소식, 재미있는 CAE이야기를 가장 먼저 만나보세요.